Laurel

Laureate™ Scale Meter for Weighing Applications

(High accuracy weight, low cost, plus control outputs)
DPM Type:
LW Scale Meter.DC or load cell signal conditioner $260
Main Board:
1 Standard Main Board, Green LEDs NC
2 Standard Main Board, Red LEDs NC
3 Extended Main Board, Green LEDs $30
4 Extended Main Board, Red LEDs $30
  Note: Extended capability is required for custom curve linearization or for display of time rate of change, such as flow rate from changing tank level or acceleration from changing speed. Not applicable to temperature.
Power:
0 Isolated 85-264 VAC & 90-370 VDC NC
1 Isolated 8-28 VAC & 9-37 VDC $30
Setpoint Output:
0 None NC
1 Dual 10A Contact Relays $80
2 Isolated Dual Solid State Relays $55
Analog Output:
0 None NC
1 Isolated 0-20mA & 0-10V $90
Digital Interface:
 0  None NC
 RS232 $60
 2  RS485 (dual RJ11 connectors) $80
 4  RS485 Modbus (dual RJ45 connectors) $90
 USB $60
 6  USB-to-RS485 converter  $100
Signal Input:
Process Signals (e.g., 4-20 mA, 0-5 V)
P Default Scaling 4-20 mA = 0 - 100.00 NC
P1 Custom Scaling $10
In the write-in field of your invoice, specify min input, min reading; max input, max reading

Strain Gage, Potentiometer (4-wire ratio)

SG Default Scaling 0 - 200 mV = 0 - 100.00 NC
SG1 Custom Scaling $60
In the write-in field of your invoice, specify min input, min reading; max input, max reading. Full-scale input is 20-500 mV. Excitation is 10V for up to four 350-om load cells
Note: The same DC signal conditioner board can be user-configured for DC Volts, DC Amps, process, or strain. It is precalibrated in EEPROM for all DC Volt and DC Amp ranges listed.
Add-on
Options
BL Blank Lens without Button Pads NC
CBL01 RJ11-to-DB9 Cable $19
CBL02 USB-to-DB9 Adapter $39
CBL05 USB Cable, A to B $15
IPC Splash-proof Cover $40
BOX1 NEMA-4 Enclosure $140
BOX2 NEMA-4 Enclosure plus IPC $180
Configured model number : LW10000PBL
Configured price per model: $260

 
5672 Bolsa Avenue Huntington Beach, CA 92649 - USA - Ph (714) 622-2000 - Fax (714) 622-2001