Haskel

Gas Booster

Haskel International Air and Hydraulic Driven Gas Boosters provide for pressures up to 39,000 psi (2690 bar). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging. Key features include:
  • Air driven - no electricity required
  • No airline lubricator required
  • Hydrocarbon free - separation between air and gas sections
  • Pressures to 39,000 psi (2690 bar)
  • Wide range of models
  • Built-in-cooling on most models
  • Standard and custom systems available
Quotation

Haskel International HG Series Gas Booster

Accessories
Depending on the application, the Haskel basic booster is supplied as a single-stage/double-acting or two-stage design for integration by the customer. Both designs feature:

 

  • Single-acting, single-stage air pressure amplifiers
  • 3 models with ratios of (2.5:1), (3.5:1) & (4.5:1)
  • Maximum inlet pressure of 125 psi
  • Maximum outlet pressures from 320 psi to 600 psi
Single-Stage/Double-Acting Gas Booster Units
  • Available in 9 models with flow rates to 160 scfm and maximum supply and outlet pressures to 20,000 psi
  • Designed for high flow and low-to-medium compression ratios
  • Multiple units can be driven by one power source
  • Accepts full available supply pressure
Two-Stage Gas Booster Units
  • Available in 9 models with flow rates to 29 scfm, maximum supply pressure to 9,000 psi, and maximum outlet pressure to 20,000 psi
  • Designed for low flow and medium-to-high compression ratios
  • Modular construction for easy gas section maintenance
  • Adapts readily to multiple units in parallel or in series driven by one power source

Haskel Hydraulically Driven Gas Booster Systems

Accessories
Series 100 Basic Gas Booster System

This economical gas booster system is based on an open frame L-shaped hydraulic power supply and offers the following standard features:

  • Haskel's advanced HG Series Gas Booster(s)
  • Smart-valve controller with relief valve protection for smooth, reliable operation
  • Hydraulic power supply with reservoir and drip pan
  • Gas pressure and hydraulic pressure instrumentation
  • Hydraulic cooling loop
  • Stainless steel interconnecting pipework on all gas sections
Single-Stage/Double-Acting Gas Booster Units

This fully-equipped Haskel gas booster system is incorporated in an enclosed cabinet. The circuit is similar to the Series 100 systems, but includes various additional features such as:

 

  • Available in 9 models with flow rates to 160 scfm and maximum supply and outlet pressures to 20,000 psi
  • Designed for high flow and low-to-medium compression ratios
  • Multiple units can be driven by one power source
  • Accepts full available supply pressure
Series 200 optional features include
  • Motor starter
  • Inlet pressure control loop
  • Temperature control loop
  • Water chiller - cooling loop
  • Noise attenuated panels
  • Heater hydraulic reservoir
  • Remote operator station
Quotation
download Download our Brochures
5672 Bolsa Avenue Huntington Beach, CA 92649 - USA - Ph (714) 622-2000 - Fax (714) 622-2001